JanuSync Implementation Guide
1.0.0 - trial-use
JanuSync Implementation Guide
1.0.0 - trial-use
JanuSync Implementation Guide - Local Development build (v1.0.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions
| Active as of 2026-06-11 |
<CodeSystem xmlns="http://hl7.org/fhir">
<id value="janusync-device-data"/>
<text>
<status value="generated"/>
<div xmlns="http://www.w3.org/1999/xhtml"><p class="res-header-id"><b>Generated Narrative: CodeSystem janusync-device-data</b></p><a name="janusync-device-data"> </a><a name="hcjanusync-device-data"> </a><p>This case-sensitive code system <code>http://connectdtx.kr/fhir/CodeSystem/janusync-device-data</code> defines the following codes in an undefined hierarchy:</p><table class="codes"><tr><td><b>Lvl</b></td><td style="white-space:nowrap"><b>Code</b></td><td><b>Display</b></td></tr><tr><td>1</td><td style="white-space:nowrap">obstetric<a name="janusync-device-data-obstetric"> </a></td><td>산과</td></tr><tr><td>2</td><td style="white-space:nowrap"> obstetric.ctg.fhr<a name="janusync-device-data-obstetric.46ctg.46fhr"> </a></td><td>태아심박/자궁수축 (CTG)</td></tr><tr><td>3</td><td style="white-space:nowrap"> obstetric.ctg.fhr-baseline<a name="janusync-device-data-obstetric.46ctg.46fhr-baseline"> </a></td><td>태아 심박수 평균값 (bpm)</td></tr><tr><td>2</td><td style="white-space:nowrap"> obstetric.ctg.uc<a name="janusync-device-data-obstetric.46ctg.46uc"> </a></td><td>자궁수축</td></tr><tr><td>3</td><td style="white-space:nowrap"> obstetric.ctg.uc-frequency<a name="janusync-device-data-obstetric.46ctg.46uc-frequency"> </a></td><td>1시간 단위 자궁수축 횟수</td></tr><tr><td>3</td><td style="white-space:nowrap"> obstetric.ctg.uc-duration<a name="janusync-device-data-obstetric.46ctg.46uc-duration"> </a></td><td>자궁수축지속시간(sec)</td></tr><tr><td>3</td><td style="white-space:nowrap"> obstetric.ctg.uc-interval<a name="janusync-device-data-obstetric.46ctg.46uc-interval"> </a></td><td>자궁수축간격(sec)</td></tr><tr><td>1</td><td style="white-space:nowrap">ventilator<a name="janusync-device-data-ventilator"> </a></td><td>호흡기</td></tr><tr><td>2</td><td style="white-space:nowrap"> ventilator.alarm<a name="janusync-device-data-ventilator.46alarm"> </a></td><td>알람</td></tr><tr><td>3</td><td style="white-space:nowrap"> ventilator.alarm.high-airway-pressure<a name="janusync-device-data-ventilator.46alarm.46high-airway-pressure"> </a></td><td>기도압 상한 초과</td></tr><tr><td>3</td><td style="white-space:nowrap"> ventilator.alarm.low-tidal-volume<a name="janusync-device-data-ventilator.46alarm.46low-tidal-volume"> </a></td><td>일회호흡량 하한 미달</td></tr><tr><td>3</td><td style="white-space:nowrap"> ventilator.alarm.apnea<a name="janusync-device-data-ventilator.46alarm.46apnea"> </a></td><td>무호흡</td></tr><tr><td>3</td><td style="white-space:nowrap"> ventilator.alarm.circuit-disconnection<a name="janusync-device-data-ventilator.46alarm.46circuit-disconnection"> </a></td><td>회로 분리</td></tr><tr><td>3</td><td style="white-space:nowrap"> ventilator.alarm.power-failure<a name="janusync-device-data-ventilator.46alarm.46power-failure"> </a></td><td>전원 이상</td></tr><tr><td>3</td><td style="white-space:nowrap"> ventilator.alarm.low-battery<a name="janusync-device-data-ventilator.46alarm.46low-battery"> </a></td><td>배터리 부족</td></tr><tr><td>2</td><td style="white-space:nowrap"> ventilator.monitoring<a name="janusync-device-data-ventilator.46monitoring"> </a></td><td>모니터링</td></tr><tr><td>3</td><td style="white-space:nowrap"> ventilator.monitoring.spo2-min<a name="janusync-device-data-ventilator.46monitoring.46spo2-min"> </a></td><td>Minimum SpO2 during monitoring period 모니터링 기간 중 최저 산소포화도(%)</td></tr><tr><td>3</td><td style="white-space:nowrap"> ventilator.monitoring.desaturation-event<a name="janusync-device-data-ventilator.46monitoring.46desaturation-event"> </a></td><td>Oxygen desaturation event 산소 불포화 이벤트 횟수(count)</td></tr><tr><td>2</td><td style="white-space:nowrap"> ventilator.set<a name="janusync-device-data-ventilator.46set"> </a></td><td>설정 값</td></tr><tr><td>3</td><td style="white-space:nowrap"> ventilator.set.ipap<a name="janusync-device-data-ventilator.46set.46ipap"> </a></td><td>Set inspiratory positive airway pressure 설정 흡기 양압 (cmH2O)</td></tr><tr><td>3</td><td style="white-space:nowrap"> ventilator.set.epap<a name="janusync-device-data-ventilator.46set.46epap"> </a></td><td>Set expiratory positive airway pressure 설정 호기 양압 (cmH2O)</td></tr><tr><td>3</td><td style="white-space:nowrap"> ventilator.set.tidal-volume<a name="janusync-device-data-ventilator.46set.46tidal-volume"> </a></td><td>Set tidal volume 설정 일회호흡량 (mL)</td></tr><tr><td>3</td><td style="white-space:nowrap"> ventilator.set.backup-rate<a name="janusync-device-data-ventilator.46set.46backup-rate"> </a></td><td>Backup respiratory rate 보조 호흡수 (bpm)</td></tr><tr><td>3</td><td style="white-space:nowrap"> ventilator.set.insp-time<a name="janusync-device-data-ventilator.46set.46insp-time"> </a></td><td>Set inspiratory time 설정 흡기 시간 (sec)</td></tr><tr><td>2</td><td style="white-space:nowrap"> ventilator.mode<a name="janusync-device-data-ventilator.46mode"> </a></td><td>모드</td></tr><tr><td>3</td><td style="white-space:nowrap"> ventilator.mode.pcv<a name="janusync-device-data-ventilator.46mode.46pcv"> </a></td><td>Pressure Control Ventilation 압력 조절 환기 (PCV)</td></tr><tr><td>3</td><td style="white-space:nowrap"> ventilator.mode.psv<a name="janusync-device-data-ventilator.46mode.46psv"> </a></td><td>Pressure Support Ventilation 압력 지지 환기 (PSV)</td></tr><tr><td>3</td><td style="white-space:nowrap"> ventilator.mode.st<a name="janusync-device-data-ventilator.46mode.46st"> </a></td><td>Spontaneous/Timed 자발/시간 조절 환기 (ST)</td></tr><tr><td>3</td><td style="white-space:nowrap"> ventilator.mode.vc<a name="janusync-device-data-ventilator.46mode.46vc"> </a></td><td>Volume Control 용량 조절 환기 (VC)</td></tr><tr><td>1</td><td style="white-space:nowrap">rehab<a name="janusync-device-data-rehab"> </a></td><td>재활운동</td></tr><tr><td>2</td><td style="white-space:nowrap"> rehab.session<a name="janusync-device-data-rehab.46session"> </a></td><td>운동 세션</td></tr><tr><td>3</td><td style="white-space:nowrap"> rehab.session.goal-exercises<a name="janusync-device-data-rehab.46session.46goal-exercises"> </a></td><td>운동 템플릿 상 해당 세션에 포함된 운동 종류 수</td></tr><tr><td>3</td><td style="white-space:nowrap"> rehab.session.goal-count<a name="janusync-device-data-rehab.46session.46goal-count"> </a></td><td>세션에서 달성해야 하는 목표 횟수</td></tr><tr><td>3</td><td style="white-space:nowrap"> rehab.session.goal-seconds<a name="janusync-device-data-rehab.46session.46goal-seconds"> </a></td><td>세션에서 달성해야 하는 목표 수행 시간 (초)</td></tr><tr><td>3</td><td style="white-space:nowrap"> rehab.session.total-counts<a name="janusync-device-data-rehab.46session.46total-counts"> </a></td><td>Vision 기반으로 실제 수행했다고 인정된 동작 횟수</td></tr><tr><td>3</td><td style="white-space:nowrap"> rehab.session.total-seconds<a name="janusync-device-data-rehab.46session.46total-seconds"> </a></td><td>세션 중 운동을 실제로 수행한 시간 (초)</td></tr><tr><td>3</td><td style="white-space:nowrap"> rehab.session.closest-score<a name="janusync-device-data-rehab.46session.46closest-score"> </a></td><td>정확도 점수(동작마다 측정)</td></tr><tr><td>3</td><td style="white-space:nowrap"> rehab.session.performance-rate<a name="janusync-device-data-rehab.46session.46performance-rate"> </a></td><td>세션에서 목표 대비 실제 수행 수준 (%)</td></tr><tr><td>3</td><td style="white-space:nowrap"> rehab.session.accuracy-rate<a name="janusync-device-data-rehab.46session.46accuracy-rate"> </a></td><td>세션 내에서 시도한 동작 중 '정확하게 수행' 으로 인정된 비율 (%)</td></tr><tr><td>3</td><td style="white-space:nowrap"> rehab.session.average-exercise-time<a name="janusync-device-data-rehab.46session.46average-exercise-time"> </a></td><td>세션 내 동작 1회 수행에 소요된 평균 시간 (초)</td></tr><tr><td>2</td><td style="white-space:nowrap"> rehab.step-count<a name="janusync-device-data-rehab.46step-count"> </a></td><td>걸음 수</td></tr><tr><td>2</td><td style="white-space:nowrap"> rehab.step-count.data-origin<a name="janusync-device-data-rehab.46step-count.46data-origin"> </a></td><td>데이터 출처 패키지명</td></tr><tr><td>1</td><td style="white-space:nowrap">postop<a name="janusync-device-data-postop"> </a></td><td>수술 후 상태</td></tr><tr><td>1</td><td style="white-space:nowrap">device<a name="janusync-device-data-device"> </a></td><td>디바이스</td></tr><tr><td>2</td><td style="white-space:nowrap"> device.usage-time<a name="janusync-device-data-device.46usage-time"> </a></td><td>Daily ventilator usage duration 일일 인공호흡기 사용 시간(hour)</td></tr><tr><td>2</td><td style="white-space:nowrap"> device.sd-write-error<a name="janusync-device-data-device.46sd-write-error"> </a></td><td>SD card data write error SD 카드 데이터 쓰기 오류</td></tr><tr><td>2</td><td style="white-space:nowrap"> device.battery-voltage<a name="janusync-device-data-device.46battery-voltage"> </a></td><td>배터리 잔량 (값 * 0.1 V)</td></tr><tr><td>2</td><td style="white-space:nowrap"> device.battery-percent<a name="janusync-device-data-device.46battery-percent"> </a></td><td>배터리 잔량 (%)</td></tr><tr><td>2</td><td style="white-space:nowrap"> device.hw-version<a name="janusync-device-data-device.46hw-version"> </a></td><td>하드웨어 버전 (값 * 0.01)</td></tr><tr><td>2</td><td style="white-space:nowrap"> device.sw-version<a name="janusync-device-data-device.46sw-version"> </a></td><td>소프트웨어 버전 (값 * 0.01)</td></tr></table></div>
</text>
<url value="http://connectdtx.kr/fhir/CodeSystem/janusync-device-data"/>
<version value="1.0.0"/>
<name value="JanuSyncDeviceData"/>
<title value="JanuSync device Data CodeSystem"/>
<status value="active"/>
<date value="2026-06-11T05:05:07+00:00"/>
<publisher value="PHI DIGITAL HEALTHCARE,inc"/>
<contact>
<name value="PHI DIGITAL HEALTHCARE,inc"/>
<telecom>
<system value="url"/>
<value value="https://phidigital.co.kr"/>
</telecom>
</contact>
<contact>
<name value="기술지원"/>
<telecom>
<system value="email"/>
<value value="support@phidigital.co.kr"/>
<use value="work"/>
</telecom>
</contact>
<jurisdiction>
<coding>
<system value="urn:iso:std:iso:3166"/>
<code value="KR"/>
<display value="Korea, Republic of"/>
</coding>
</jurisdiction>
<caseSensitive value="true"/>
<content value="complete"/>
<count value="50"/>
<concept>
<code value="obstetric"/>
<display value="산과"/>
<concept>
<code value="obstetric.ctg.fhr"/>
<display value="태아심박/자궁수축 (CTG)"/>
<concept>
<code value="obstetric.ctg.fhr-baseline"/>
<display value="태아 심박수 평균값 (bpm)"/>
</concept>
</concept>
<concept>
<code value="obstetric.ctg.uc"/>
<display value="자궁수축"/>
<concept>
<code value="obstetric.ctg.uc-frequency"/>
<display value="1시간 단위 자궁수축 횟수"/>
</concept>
<concept>
<code value="obstetric.ctg.uc-duration"/>
<display value="자궁수축지속시간(sec)"/>
</concept>
<concept>
<code value="obstetric.ctg.uc-interval"/>
<display value="자궁수축간격(sec)"/>
</concept>
</concept>
</concept>
<concept>
<code value="ventilator"/>
<display value="호흡기"/>
<concept>
<code value="ventilator.alarm"/>
<display value="알람"/>
<concept>
<code value="ventilator.alarm.high-airway-pressure"/>
<display value="기도압 상한 초과"/>
</concept>
<concept>
<code value="ventilator.alarm.low-tidal-volume"/>
<display value="일회호흡량 하한 미달"/>
</concept>
<concept>
<code value="ventilator.alarm.apnea"/>
<display value="무호흡"/>
</concept>
<concept>
<code value="ventilator.alarm.circuit-disconnection"/>
<display value="회로 분리"/>
</concept>
<concept>
<code value="ventilator.alarm.power-failure"/>
<display value="전원 이상"/>
</concept>
<concept>
<code value="ventilator.alarm.low-battery"/>
<display value="배터리 부족"/>
</concept>
</concept>
<concept>
<code value="ventilator.monitoring"/>
<display value="모니터링"/>
<concept>
<code value="ventilator.monitoring.spo2-min"/>
<display
value="Minimum SpO2 during monitoring period 모니터링 기간 중 최저 산소포화도(%)"/>
</concept>
<concept>
<code value="ventilator.monitoring.desaturation-event"/>
<display value="Oxygen desaturation event 산소 불포화 이벤트 횟수(count)"/>
</concept>
</concept>
<concept>
<code value="ventilator.set"/>
<display value="설정 값"/>
<concept>
<code value="ventilator.set.ipap"/>
<display
value="Set inspiratory positive airway pressure 설정 흡기 양압 (cmH2O)"/>
</concept>
<concept>
<code value="ventilator.set.epap"/>
<display
value="Set expiratory positive airway pressure 설정 호기 양압 (cmH2O)"/>
</concept>
<concept>
<code value="ventilator.set.tidal-volume"/>
<display value="Set tidal volume 설정 일회호흡량 (mL)"/>
</concept>
<concept>
<code value="ventilator.set.backup-rate"/>
<display value="Backup respiratory rate 보조 호흡수 (bpm)"/>
</concept>
<concept>
<code value="ventilator.set.insp-time"/>
<display value="Set inspiratory time 설정 흡기 시간 (sec)"/>
</concept>
</concept>
<concept>
<code value="ventilator.mode"/>
<display value="모드"/>
<concept>
<code value="ventilator.mode.pcv"/>
<display value="Pressure Control Ventilation 압력 조절 환기 (PCV)"/>
</concept>
<concept>
<code value="ventilator.mode.psv"/>
<display value="Pressure Support Ventilation 압력 지지 환기 (PSV)"/>
</concept>
<concept>
<code value="ventilator.mode.st"/>
<display value="Spontaneous/Timed 자발/시간 조절 환기 (ST)"/>
</concept>
<concept>
<code value="ventilator.mode.vc"/>
<display value="Volume Control 용량 조절 환기 (VC)"/>
</concept>
</concept>
</concept>
<concept>
<code value="rehab"/>
<display value="재활운동"/>
<concept>
<code value="rehab.session"/>
<display value="운동 세션"/>
<concept>
<code value="rehab.session.goal-exercises"/>
<display value="운동 템플릿 상 해당 세션에 포함된 운동 종류 수"/>
</concept>
<concept>
<code value="rehab.session.goal-count"/>
<display value="세션에서 달성해야 하는 목표 횟수"/>
</concept>
<concept>
<code value="rehab.session.goal-seconds"/>
<display value="세션에서 달성해야 하는 목표 수행 시간 (초)"/>
</concept>
<concept>
<code value="rehab.session.total-counts"/>
<display value="Vision 기반으로 실제 수행했다고 인정된 동작 횟수"/>
</concept>
<concept>
<code value="rehab.session.total-seconds"/>
<display value="세션 중 운동을 실제로 수행한 시간 (초)"/>
</concept>
<concept>
<code value="rehab.session.closest-score"/>
<display value="정확도 점수(동작마다 측정)"/>
</concept>
<concept>
<code value="rehab.session.performance-rate"/>
<display value="세션에서 목표 대비 실제 수행 수준 (%)"/>
</concept>
<concept>
<code value="rehab.session.accuracy-rate"/>
<display value="세션 내에서 시도한 동작 중 '정확하게 수행' 으로 인정된 비율 (%)"/>
</concept>
<concept>
<code value="rehab.session.average-exercise-time"/>
<display value="세션 내 동작 1회 수행에 소요된 평균 시간 (초)"/>
</concept>
</concept>
<concept>
<code value="rehab.step-count"/>
<display value="걸음 수"/>
</concept>
<concept>
<code value="rehab.step-count.data-origin"/>
<display value="데이터 출처 패키지명"/>
</concept>
</concept>
<concept>
<code value="postop"/>
<display value="수술 후 상태"/>
</concept>
<concept>
<code value="device"/>
<display value="디바이스"/>
<concept>
<code value="device.usage-time"/>
<display value="Daily ventilator usage duration 일일 인공호흡기 사용 시간(hour)"/>
</concept>
<concept>
<code value="device.sd-write-error"/>
<display value="SD card data write error SD 카드 데이터 쓰기 오류"/>
</concept>
<concept>
<code value="device.battery-voltage"/>
<display value="배터리 잔량 (값 * 0.1 V)"/>
</concept>
<concept>
<code value="device.battery-percent"/>
<display value="배터리 잔량 (%)"/>
</concept>
<concept>
<code value="device.hw-version"/>
<display value="하드웨어 버전 (값 * 0.01)"/>
</concept>
<concept>
<code value="device.sw-version"/>
<display value="소프트웨어 버전 (값 * 0.01)"/>
</concept>
</concept>
</CodeSystem>